Time to update your systems — Version 11.11.0 is here!
| By iSimulate
REALITi Version 11.11.0 & CTGi Version 1.0.12 (55) Updates
Prepare to enhance your REALITi 360 and CTGi experience with our latest update! Explore improvements that will enhance your customers' experience.
Latest Improvements
Atlas
- Changed the WiFi change result message to be multiline
- Updated WiFi name change field
- New update message now shows on Atlas Baby when on WiFI
- Disconnect issue at the end of the update in Atlas Baby resolved
- Improved update speed in Atlas Baby
- Updated Atlas Baby firmware to 1.4.8
Corpuls
- Resolved the issue on cardioversion settings where Autosync is not set as the default setting in both C1 and C3
- Corrected order of mode selection to Async, Sync, and Auto Sync in both C1 and C3
- Fixed C1 — Double up of voice prompt to press analyse
- Fixed C1 — No oximetry pulse tone
- Corrected translation “Schrittmacher ausschalten?”
- Added the missing text after a shock is performed in Manual defibrillator, ‘Shock performed — Perform CPR’ in both EN and DE
- Changed pie chart symbol to shock (lightning) symbol in C1
- Added pause and resume features on AED/Manual defibrillator’s elapsed and pie chart timers of C1 and C3 for scenario pauses
- Applied pause and resume features on C1 and C3 pie charts for scenario pauses
- Created timer reset features on C1 and C3 power buttons
- Resolved the issue where AED/Manual defibrillator timers are not resetting when switching between monitors from the Control
CTGi
- Removed the requirement for a licensed CTGi app to check in annually
Multiple Screens
- Fixed fluctuating HR on slower iPads
Nihon Kohden — EMS1052
- Resolved the issues regarding overlapping alarm messages of IP disconnections
- Added Zero CAL message limitations — messages will disappear when calibration is done
- Added STAT mode
- Assigned STAT as default when Patient type is changed
- Initialised oscillation graph images to NIBP process — generic images only
- Added cancellation of NIBP calculation when Manual is ready to shock or when AED analysis has started
- Fixed glitch on rendering dash line affecting some monitors
- Resolved the issue of incorrect paper positioning on different screen sizes
- Fixed the issue where the paper comes out from a different area when scrolling is used
- Added second tab in Press menu
- Created a priority of display for CO2 and ART line since REALITi supports more than two sockets — other Critical Care added will not be displayed unless one of the two is disconnected
- Resolved the issue of the ‘More Setup’ button toggles the IP tab when clicked
- Resolved the issue of ART showing up in Press even when disconnected
- Corrected Press current tab highlight (blue) on selection
- Added Zero Cal for secondary IP attachments
- Added Press Label for second socket
- Allowed enabling back of used Press Label when an IP is disconnected
- Improved the More Setup menu for the second label, with correct tab repositioning when disconnected
- Improved IP label removal in the More Setup menu when the priority CO2 connection is established
Zoll X
- Changed EtCO2 to be off by default